Guoping Chen

Work place: School of Communication and Information Engineering, Chongqing 400065, China 2 School of Electronic Engineering, Chengdu 610054, China



Research Interests: Computational Science and Engineering, Computational Engineering, Engineering


Guoping Chen received M.S. degrees in school of electronic information from the University of Sichuan, Sichuan, China, and the Ph.D. degree in School of Electronic Engineering, University of Electronic Science and Technology of China, in 2006 and 2009, respectively.
In 2009 , he became associate professor with the School of Communication and Information Engineering, Chongqing University of Posts and Telecommunications. His current research interests is Critical technologies of the microwave-induced thermo-acoustic tomography system.

Author Articles
Loudspeaker Operation Status Monitoring System based on Power Line Communication Technology

By Biyue Diao Guoping Chen Feng He

DOI:, Pub. Date: 8 Oct. 2018

With the rapid development of science and technology, intelligent systems have been applied to various fields. A monitoring system for the operating status of loudspeakers based on power line communication was designed and implemented. In this paper, firstly analyzes the deficiencies of previous research, and then according to the actual situation, it is concluded that the power line communication technology is more suitable for loudspeaker operating status monitoring than other communication technologies. The overall design, hardware design and software design of the entire system was introduced. And in the last, the reliability of the system were proved by many experiments. This system can be used in other applications in addition to the monitoring of the operating status of the loudspeakers.

[...] Read more.
Combining Time Reversal and Fast Marching Method in Wireless Indoor Positioning

By Guoping Chen Wenshan Wang Hao Zeng Chun Guan Feng He

DOI:, Pub. Date: 8 Nov. 2013

Most of current wireless indoor positioning methods could not accurately obtain channel model, the mapping between spatial position and received signal features. The main factor for a precise channel model in an indoor environment is multipath effect. Time reversed (TR) wireless indoor positioning method has been validated to effectively reduce signals fading or time delay affected by multipath effect. However, these advantages are depended on a prior known channel model, without this condition, the accuracy of TR method will be seriously deteriorated. To solve the shortcoming of a general TR method in an unknown channel model application, we present a combining Time Reversal and Fast Marching Method (TR-FMM) positioning method. This method locates a target with two stages. In the stage one, the precise channel model of an indoor environment is estimated by FMM and simultaneous algebraic reconstruction technique (SART). In this stage, Time of Flight (TOF) information generated by some fixed spatial position anchors are used to fulfill the indoor channel model estimation, then the needed channel impulse response (CIR) for TR method will be obtained based on the estimated channel model. In the stage two, with the obtained CIR, any new joint mobile target will be accurately located by a general TR wireless indoor positioning method. Some numerical simulations have been presented to validate the proposed method. Simulative results depict the positioning deviation is less than 3cm for a newly joined mobile target with 1cm scale in a moderate complex indoor configure, and the accuracy of the positioning is improved 30 times comparing to a general TR method. The positioning time in the stage 2 is less than 3 minutes in a PC with 1.6 GHz dual CPUs and 2G Bytes memory. Obviously, the proposed method has great advantage in high accuracy and low complexity for wireless indoor positioning system.

[...] Read more.
Pseudo-Spectrum Time Domain and Time Reversal Mirror technique using in Microwave-induced Thermo-Acoustic Tomography System

By Guoping Chen Zhiqin Zhao Qing.H. Liu

DOI:, Pub. Date: 8 Jun. 2011

Microwave-Induced Thermo-Acoustic Tomograp- phy (MITAT) has attracted more concerns in recent years in biomedical imaging field. It has both the high contrast of the microwave imaging and the high resolution of ultrasound imaging. As compared to optoacoustics, which uses instead a pulsed light for evoking optoacoustic response, thermo-aco- ustic imaging has the advantage of deeper tissue penetration, attaining the potential for wider clinical dissemination, especially for malignant tumors. In this paper, the induced thermo-acoustic wave propagating in a mimic biologic tissue is simulated by numeric method Pseudo-Spectrum Time Domain (PSTD). Due to the excellent performance in noise- depress and the stability for the fluctuation of the model parameters, Time Reversal Mirror (TRM) imaging technique is studied computationally for the simulative received therm- o-acoustic signals. Some thermo-acoustic objects with differ- ent initial pressure distribution are designed and imaged by TRM technique to represent the complex biologic tissue case in a random media. The quality of images generated by TRM technique based on PSTD method hints the potential of the MITAT technique.

[...] Read more.
Other Articles