Formation of Optimum Temperature Graph of Paper Web Warming

Full Text (PDF, 525KB), PP.20-26

Views: 0 Downloads: 0


Anatoliy Zhuchenko 1,* Evgeniy Cheropkin 1 Liudmyla Osipa 2 Su Jun 3

1. Department of Chemical Production Automation, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine

2. Department of Electronic and Computer Engineering, National Transport University, Kyiv, Ukraine

3. School of Computer Science, Hubei University of Technology, Wuhan, China

* Corresponding author.


Received: 5 Jul. 2018 / Revised: 15 Aug. 2018 / Accepted: 23 Sep. 2018 / Published: 8 Nov. 2018

Index Terms

Paper machine, drying section of a paper machine, quality parameters of paper, optimal temperature graph, quality control criterion, algorithm for calculating optimal temperature graph, system of optimal control of heating a paper web


To date, the requirements for the quality of paper products are increasing. At the same time, the most common trend in recent years is improving the resource and energy conservation of all technological processes. From the point of view of specialists in the field of paper industry in technological process of production on a paper machine, the greatest attention must be paid to the drying of a paper web. This process is the most expensive and decisive for a large number of quality parameters of finished products. In order to satisfy these requirements, it is necessary to implement a system of optimal control for this technological process.
The first and one of the most important parts of the development of such system is the formation of a criterion for the optimal control and calculation of the optimal mode of operation of the first stage of drying - the heating of a paper web. For this purpose, the problem of calculating the optimal temperature graph of heating the paper web in the drying section of a paper machine is considered. Proposed quality control criterion ensures the maintenance of the parameters of finished products within the limits defined by the standard. Established limitations on the dynamics of temperature change on each drying cylinder and the final values.
The calculation of the optimal temperature schedule is made by taking into account the characteristics of the material, the changes in the parameters of heat and mass transfer, which are functional dependences on the temperature of the paper web. The formulas for calculating the temperature of the paper at the exit from each drying cylinder and the free movement sections are based on the data on partial pressure on the surface of the paper web and in the environment.
Results of the work are presented in the form of a step-by-step algorithm. Implementation of the developed algorithm ensures uniform heating of the paper web and reaches the optimum temperature for effective removal of moisture.

Cite This Paper

Anatoliy Zhuchenko, Evgeniy Cheropkin, Liudmyla Osipa, Su Jun, "Formation of Optimum Temperature Graph of Paper Web Warming", International Journal of Intelligent Systems and Applications(IJISA), Vol.10, No.11, pp.20-26, 2018. DOI:10.5815/ijisa.2018.11.03


[1]Pulp and paper capacities. Food and agriculture organization of the united nations. Rome, Roma, 2016.
[2]Ivanov S. N. Tehnologiya bumagi. – M.: Lesn. prom-st, 1970. – 696 s. (in Russian)
[3]Karlsson, M. Papermaking Science and Technology: Papermaking Part 2, Drying, (ed), Finnish Engineers’ Association and Tappi, Chapter 9 (2000). – P. 81-86.
[4]Cheropkin E. S. Postanovka zadachi optimalnogo upravleniya protsessom progreva bumazhnogo polotna v sushilnoy chasti bumagodelatelnoy mashinyi. / Zhuchenko A. I., Cheropkin E. S. // Avtomatizatsiya promislovih i biznes protsesiv. – O.: 2015 – # 22. – S. 25-31. (in Russian)
[5]Zhao Xiuxu, Zhu Yuming, "Application Research of Ontology-enabled Process FMEA Knowledge Management Method", International Journal of Intelligent Systems and Applications(IJISA), vol. 4, no. 3, pp. 34-40, 2012. DOI: 10.5815/ijisa. 2012.03.05
[6]Saeid A. Keshtgar, Bahman B. Arasteh,"Enhancing Software Reliability against Soft-Error using Minimum Redundancy on Critical Data", International Journal of Computer Network and Information Security(IJCNIS), Vol.9, No.5, pp.21-30, 2017.DOI: 10.5815/ijcnis.2017.05.03
[7]Darakshan Anjum, Tasleem Mustafa,"Reliability of Software Correlated Components Failure in Pakistan Industry", International Journal of Information Engineering and Electronic Business (IJIEEB), Vol.9, No.2, pp.27-35, 2017. DOI: 10.5815/ijieeb.2017.02.04
[8]Michael Onuoha Thomas, Babak Bashari Rad,"Reliability Evaluation Metrics for Internet of Things, Car Tracking System: A Review", International Journal of Information Technology and Computer Science (IJITCS), Vol.9, No.2, pp.1-10, 2017. DOI: 10.5815/ijitcs.2017.02.01
[9]Belskiy A. P. Spetsialnyie voprosyi teplomassoobmena v energeticheskih i teplotehnologicheskih protsessah i ustanovkah: uchebnoe posobie. – Izd. 2-e, ispr. i dop. / A.P. Belskiy, V.Yu. Lakomkin– GOUVPO SPb GTU RP. – SPb.: – 2011. – 98 s.: il. 38. (in Russian)
[10]Lakomkin V. Yu. Teplotehnicheskiy raschet mnogotsilindrovoy sushilnoy chasti bumagodelatelnoy mashinyi: metodicheskie ukazaniya / V. Yu. Lakomkin, A. P. Belskiy – GOUVPO SPb GTU RP. – SPb.:– 2006. – 230 s. (in Russian)
[11]Kubrak A. I. Chislovi metodi. Algoritmi i programi: [navch. posib.] / Kubrak A. I., Zhuchenko A. I., SitnIkov O. V.; Nats. tehn. un-t Ukraini "Kyiv. politehn. in-t". – K.: Poltehnika, 2013. – 389 s. (in Ukrainian)
[12]Lyikov A. V. Teoriya teploprovodnosti. Uchebnoe posobie. – M.: Vyisshaya shkola, 1967. – 600 s. (in Russian)