Oleksandr Trukhan; Zarina Poberezhna; Maksym Zaliskyi; Yanina Goncharenko

Mathematical Model of Strategic Diagnostics of Enterprise in the Circular Economy Adaptation Process

PDF (783KB), PP.56-70

Views: 0 Downloads: 0

Author(s)

Oleksandr Trukhan ¹ Zarina Poberezhna ² Maksym Zaliskyi ^3,4,* Yanina Goncharenko ⁵

1. Zhytomyr Institute PrJSC “Higher Educational Institution “Interregional Academy of Personnel Management (IAPM)”/Department of fundamental training, management and administration, Zhytomyr, 10003, Ukraine

2. State University “Kyiv Aviation Institute”/Department of Economics and Business Technologies, Kyiv, 03058, Ukraine

3. State University “Kyiv Aviation Institute”/Department of Telecommunication and Radioelectronic Systems, Kyiv, 03058, Ukraine

4. Interregional Academy of Personnel Management/Department of Computer Science and Intelligent Systems, Kyiv, 03039, Ukraine

5. Dragomanov Ukrainian State University/Department of Higher Mathematics, Kyiv, 01001, Ukraine

* Corresponding author.

DOI: https://doi.org/10.5815/ijieeb.2026.01.04

Received: 26 Aug. 2025 / Revised: 25 Oct. 2025 / Accepted: 7 Jan. 2026 / Published: 8 Feb. 2026

Index Terms

Strategic Diagnostics, Circular Economy, Sustainable Industry, Sustainable Economic, Strategic Management, Strategic Development, Business Process, Life Cycle Analysis, Resource Saving, Principal Component Analysis, Closed Loop Recycling

Abstract

The article considers the development of strategic diagnostics of an enterprise in the condition of adaptation to a circular economy. In the context of global economic and environmental changes, strategic diagnostics is an important tool for assessing the effectiveness of the implemented changes and adapting to new challenges. The authors emphasize the importance of implementing the principles of a circular economy, which involve minimizing waste and reusing resources. It is obvious that in the process of adapting an enterprise to the conditions of a circular economy, strategic diagnostics plays an important role, which allows assessing the enterprise readiness to transition to a new economic model, determining its competitive advantages and developing effective development strategies. A set of strategic diagnostics tools with their adaptation to the conditions of a circular economy is systematized. It is substantiated that the proposed tools allow enterprises to effectively adapt to the conditions of a circular economy, reduce environmental impact, increase competitiveness, and find new opportunities for sustainable economic development. An algorithm for using strategic diagnostics of the enterprise in the context of adaptation to circular economy is developed. The presented algorithm allows enterprises to effectively adapt to the conditions of the circular economy, increase competitiveness, and ensure long-term business sustainability.

Cite This Paper

Oleksandr Trukhan, Zarina Poberezhna, Maksym Zaliskyi, Yanina Goncharenko, "Mathematical Model of Strategic Diagnostics of Enterprise in the Circular Economy Adaptation Process", International Journal of Information Engineering and Electronic Business(IJIEEB), Vol.18, No.1, pp. 56-70, 2026. DOI:10.5815/ijieeb.2026.01.04

Reference

[1]S. D. Sever, E. Tok, and A. L. Sellami, “Sustainable development goals in a transforming world: Understanding the dynamics of localization,” in Sustainability, vol. 17(6):2763, 2025. doi: 10.3390/su17062763.
[2]N. Shahid and N. Sheikh, “Impact of Big Data on innovation, competitive advantage, productivity, and decision making: Literature review,” in Open Journal of Business and Management, vol. 9, 2021, pp. 586–617. doi: 10.4236/ojbm.2021.92032.
[3]D. Firoiu, G. H. Ionescu, C. M. Cismaș, M. P. Costin, L. M. Cismaș, S. C. F. Ciobanu, “Sustainable production and consumption in EU member states: Achieving the 2030 sustainable development goals (SDG 12),” in Sustainability, vol. 17(4):1537, 2025. doi: 10.3390/su17041537.
[4]S. M. Ali, et al., “Development goals towards sustainability,” in Sustainability, vol. 15:9443, 2023. doi: 10.3390/su15129443.
[5]K.Y.H. Lim, P. Zheng, and C.H. Chen, “A state-of-the-art survey of digital twin: Techniques, engineering product lifecycle management and business innovation perspectives,” in Journal of Intelligent Manufacturing, vol. 31, 2020, pp.1313–1337. doi: 10.1007/s10845-019-01512-w.
[6]F. A. F. Alazzam, H. J. M. Shakhatreh, Z. I. Y. Gharaibeh, I. Didiuk, and O. Sylkin, “Developing an information model for e-commerce platforms: A study on modern socioeconomic systems in the context of global digitalization and legal compliance,” in Ingenierie des Systemes d'Information, vol. 28(4), 2023, pp. 969–974. doi: 10.18280/isi.280417.
[7]A. Ardanza, A. Moreno, A. Segura, M. de la Cruz, and D. Aguinaga, “Sustainable and flexible industrial human machine interfaces to support adaptable applications in the Industry 4.0 paradigm,” in International Journal of Production Research, Vol. 57(12), 2019, pp. 4045–4059. doi: 10.1080/00207543.2019.1572932.
[8]N. Mironova, H. Koptieva, I. Liganenko, A. Sakun, and D. Chernyak, “Modeling the selection of innovative strategy for development of industrial enterprises,” in WSEAS Transactions on Business and Economics, vol. 19, 2022, pp. 278–291. doi: 10.37394/23207.2022.19.26.
[9]R. Kostyrko, T. Kosova, L. Kostyrko, L. Zaitseva, and O. Melnychenko “Ukrainian market of electrical energy: Reforming, financing, innovative investment, efficiency analysis, and audit,” in Energies, vol. 14(16):5080, 2021; doi: 10.3390/en14165080.
[10]O. Kovalko, T. Eutukhova, and O. Novoseltsev, “Energy-related services as a business: Eco-transformation logic to support the low-carbon transition,” in Energy Engineering: Journal of the Association of Energy Engineering, vol. 119(1), 2022, pp. 103–121. doi: 10.32604/EE.2022.017709.
[11]A. Zaporozhets, V. Babak, V. Isaienko, and K. Babikova, “Analysis of the air pollution monitoring system in Ukraine,” in Studies in Systems, Decision and Control, vol. 298, 2020, pp. 85–110. doi: 10.1007/978-3-030-48583-2_6.
[12]D. Atstaja, V. Koval, J. Grasis, I. Kalina, H. Kryshtal, and I. Mikhno, “Sharing model in circular economy towards rational use in sustainable production,” in Energies, vol. 15(3), 2022. doi:10.3390/en15030939.
[13]Y. Voronina, et al., “Economic and environmental component in the field of sustainable development management,” in Quality - Access to Success, vol. 25(201), 2024, pp. 7–14. doi: 10.47750/QAS/25.201.02.
[14]J. Andre, Industry 4.0: Paradoxes and Conflicts. New York: Wiley, 2019, 310 p.
[15]M. Zaliskyi, O. Solomentsev, Z. Poberezhna, O. C. Okoro, B. Chumachenko, and S. Chumachenko, “Information technologies of data processing for linear deterioration process during aviation equipment operation,” in CEUR Workshop Proceedings, vol. 3732, 2024, pp. 32–44.
[16]O. Solomentsev, et al., “Efficiency analysis of current repair procedures for aviation radio equipment,” in I. Ostroumov and M. Zaliskyi (eds.), Proceedings of the 2nd International Workshop on Advances in Civil Aviation Systems Development. ACASD 2024. Lecture Notes in Networks and Systems, vol. 992, 2024, pp. 281–295. doi: 10.1007/978-3-031-60196-5_21.
[17]A. O. Dvigun, O. І. Datsii, N. M. Levchenko, G. A. Shyshkanova, and R. М. Dmytrenko, “Rational use of fresh water as a guarantee of agribusiness development in the context of the exacerbated climate crisis,” in Science and Innovation, vol. 18(2), 2022, pp. 85–99. doi: 10.15407/scine18.02.085.
[18]R. Santos and M. J. Abreu, “Impact assessment and product life cycle analysis of different jersey fabrics using conventional, post-industrial, and post-consumer recycled cotton fibers,” in Sustainability, Vol. 17(13):5700, 2025. doi: 10.3390/su17135700.
[19]I. Lee and G. Mangalaraj, “Big data analytics in supply chain management: A systematic literature review and research directions,” in Big Data and Cognitive Computing, Vol. 6(1):17, 2022. doi: 10.3390/bdcc6010017.
[20]J. Stark, Product Lifecycle Management. Vol. 1: 21st Century Paradigm for Product Realisation. London: Springer, 2019. doi: 10.1007/978-3-030-98578-3.
[21]S. Bondarenko, A. Bratko, V. Antonov, R. Kolisnichenko, O. Hubanov, and A. Mysyk, “Improving the state system of strategic planning of national security in the context of informatization of society,” in Journal of Information Technology Management, vol. 14, 2022, pp. 1–24. doi:10.22059/jitm.2022.88861.
[22]M. Sillanpaa and C. Ncibi, The circular economy: Case studies about the transition from the linear economy. New York: Academic Press, 2019. doi: 10.1016/C2017-0-02916-6.
[23]M. Zaliskyi, V. Ivannikova, O. Solomentsev, I. Ostroumov, and N. Kuzmenko, “The approach to optimization of the structure of the repair process of aviation radio equipment,” in Transport, Vol. 40(1), 2025, pp. 50–63. doi: 10.3846/transport.2025.24012.
[24]L. N. T. Cam, “A rising trend in eco-friendly products: A health-conscious approach to green buying,” in Heliyon, vol. 9, no. 9, 2023. doi: 10.1016/j.heliyon.2023.e19845.
[25]L. Lelyk, V. Olikhovskyi, N. Mahas, and M. Olikhovska, “An integrated analysis of enterprise economy security,” in Decision Science Letters, vol. 11(3), 2022, pp. 299–310. doi: 10.5267/j.dsl.2022.2.003.
[26]V. Ivannikova, M. Zaliskyi, O. Solomentsev, I. Ostroumov, and N. Kuzmenko, “Statistical data processing technologies for sustainable aviation: A case study of Ukraine,” in Sustainability, vol. 17, no. 13, 2025. doi: 10.3390/su17135781.
[27]L. Agostini, A. Nosella, R. Sarala, and C. Nkeng, “Emerging trends around strategic flexibility: a systematic review supported by bibliometric technique,” in Management Decision, vol. 63, no. 6, 2025, pp. 1835–1881. doi: 10.1108/MD-02-2023-0135.
[28]N. M. Zayed, F. O. Edeh, S. Darwish, K. M. A. Islam, H. Kryshtal, V. Nitsenko, and O. Stanislavyk, “Human resource skill adjustment in service sector: Predicting dynamic capability in post COVID-19 work environment,” in Journal of Risk and Financial Management, vol. 15(9), 2022. doi: 10.3390/jrfm15090402.
[29]A. G. Ferrari, D. Jugend, F. Armellini, and B. M. R. P. Seles, “Opportunities and challenges of strategic planning in the context of circular economy: an exploratory analysis,” in Management of environmental quality, vol. 36(3), 2025, pp. 833–854. doi: 10.1108/MEQ-05-2024-0183.
[30]A. Pohrebniak, I. Chaikovska, O. Yushkevych, O. Kolesnyk, S. Nikolaienko, and O. Holubiev, “Circular economy as a determinant of strategic management,” in Management theory and studies for rural business and infrastructure development, vol. 46(3), 2024, pp. 362–371. doi: 10.15544/mts.2024.34.
[31]J. Kaipainen, Strategic development of circular economy business in established companies: A process approach to business strategy, business model innovation, and collaboration. Tampere: Tampere University Dissertations, vol. 922, 2023. Available at: https://trepo.tuni.fi/bitstream/handle/10024/152862/978-952-03-3198-6.pdf.
[32]M. Р. Pieroni, Т. С. McAloone, Y. Borgianni, L. Maccioni, and D. C. A. Pigosso, “An expert system for circular economy business modelling: advising manufacturing companies in decoupling value creation from resource consumption,” in Sustainable production and consumption, vol. 27, 2021, pp. 534–550. doi: 10.1016/j.spc.2021.01.023.
[33]U. I. Aguado-Riveros, et al., “Strategic business management and its role in the formalization of micro and small enterprises in emerging economies,” in World, vol. 6(2):41, 2025. doi: 10.3390/world6020041.
[34]Q. Huang and Y. Tang, “Enterprise digital transformation strategy: The impact of digital platforms,” in Entropy, vol. 27(3):295 2025. doi: 1010.3390/e27030295.
[35]R. Li, Y. Cui, and Y. Zheng, “The impact of corporate strategy on enterprise innovation based on the mediating effect of corporate risk-taking,” in Sustainability, vol. 13(3):1023, 2021. doi: 10.3390/su13031023.
[36]S. Y. Dwikat, D. Arshad, and M. N. Mohd Shariff, “The influence of systematic strategic planning and strategic business innovation on the sustainable performance of manufacturing SMEs,” in Sustainability, vol. 14(20):13388, 2022. doi: 10.3390/su142013388.
[37]H. Abu-Bakar and F. Charnley, “Developing a strategic methodology for circular economy roadmapping: A theoretical framework,” in Sustainability, vol. 16(15):6682, 2024. doi: 10.3390/su16156682.
[38]M. Zaliskyi, et al., “Methodology for substantiating the infrastructure of aviation radio equipment repair centers,” in CEUR Workshop Proceedings, vol. 3732, 2024, pp. 136–148.
[39]M. Baca-Neglia, et al., “Industry 4.0, circular economy and Sustainable Development Goals: Future research directions through scientometrics and mini-review,” in Sustainability, vol. 17(14):6468, 2025. doi: 10.3390/su17146468.
[40]A. Chakraborty, D. De, and P. K. Dey, “Circular economy in small and medium-sized enterprises – current trends, practical challenges and future research agenda,” in Systems, vol. 13(3):200, 2025. doi: 10.3390/systems13030200.
[41]A. Marciniuk-Kluska and M. Kluska, “An attempt to assess the implementation of the circular economy in the EU-27 as an important element of sustainable development,” in Sustainability, vol. 17(11):4942, 2025. doi: 10.3390/su17114942.
[42]B. Rotondo, C. Bakker, R. Balkenende, and V. Arquilla, “Integrating circular economy principles in the new product development process: A systematic literature review and classification of available circular design tools,” in Sustainability, vol. 17(9):4155, 2025. doi: 10.3390/su17094155.
[43]S. Senaratne, E. Saysanavongpheth, and M. Samaratunga, “Exploring challenges and strategies in circular economy applications in modular construction: The case in Australia,” in Buildings, vol. 15(9):1515, 2025. doi: 10.3390/buildings15091515.
[44]I. Vural Gursel, B. Elbersen, K. P. H. Meesters, and M. van Leeuwen, “Defining circular economy principles for biobased products,” in Sustainability, vol. 14(19):12780, 2022. doi: 10.3390/su141912780.
[45]M. Zoka and R. Korez Vide, “Circular economy implementation in the electric and electronic equipment industry: Challenges and opportunities,” in Sustainability, vol. 17(17):7700, 2025. doi: 10.3390/su17177700.
[46]C. Scheel and E. Aguinaga, “A systems view of circular economy,” in Sustainability, vol. 17(3):1268, 2025. doi: 10.3390/su17031268
[47]I. Ostroumov, et al., “A probability estimation of aircraft departures and arrivals delays,” in O. Gervasi, et al. (eds.), Computational Science and Its Applications – ICCSA 2021. Lecture Notes in Computer Science, vol. 12950, 2021, pp. 363–377. doi: 10.1007/978-3-030-86960-1_26.
[48]O. Solomentsev, M. Zaliskyi, Yu. Nemyrovets, and M. Asanov, “Signal processing in case of radio equipment technical state deterioration,” in Signal Processing Symposium (SPS). Debe, Poland, 2015, pp. 1–5. doi: 10.1109/SPS.2015.7168312.
[49]I. Ostroumov, V. Ivannikova, N. Kuzmenko, and M. Zaliskyi, “Impact analysis of Russian-Ukrainian war on airspace,” in Journal of Air Transport Management, vol. 124, 2025, pp. 1–14. doi: 10.1016/j.jairtraman.2025.102742.
[50]D. Atstaja, I. Liepa, A. Vembris, B. Rivza, S. Osipova, and N. Cudecka-Purina, “Circular economy index: A new methodology for evaluating circularity in municipalities,” in Sustainability, Vol. 17: 4867, 2025. doi: 10.3390/su17114867.
[51]I. Liepa and D. Atstaja, “A Comparative analysis of circular economy index in urban and rural municipalities,” in Urban Science, Vol. 9: 321, 2025. doi: 10.3390/urbansci9080321.
[52]W. C. Munonye, “Towards circular economy metrics: A systematic review,” in Circular Economy and Sustainability, Vol. 5, 2025, pp. 4093–4135. doi: 10.1007/s43615-025-00604-5.
[53]F. Figueiredo and A. Figueiredo, “Multivariate analysis of some circular economy indicators,” in Research in Statistics, Vol. 3(1), 2025. doi: 10.1080/27684520.2025.2519288
[54]P. K. Patro, A. Acquaye, R. Jayaraman, and K. Salah, “Circular economy indexing with Generative AI and PCA,” in International Conference on Computers and Industrial Engineering. Sydney, Australia, 2024, pp. 817–825.
[55]O. Arefieva, Z. Poberezhna, S. Petrovska, S. Arefiev, and Y. Kopcha, “Devising approaches to modeling enterprise business processes under conditions of modern digital technologies,” in Eastern-European Journal of Enterprise Technologies, vol. 1, no. 13(127), 2024, pp. 69–79. doi: 10.15587/1729-4061.2024.298143.
[56]O. Zham, V. Rudyka, T. Voronko-Nevidnycha, S. Bebko, C. Shikovets, and H. Kvita, “Diagnostics of the strategic management of the financial and economic development of the enterprise,” in Financial and credit activity: problems of theory and practice, vol. 5(52), 2023, pp. 162–172. doi: 10.55643/fcaptp.5.52.2023.4214.
[57]A. Kuzior, O. Arefieva, Z. Poberezhna, and O. Ihumentsev, “The mechanism of forming the strategic potential of an enterprise in a circular economy,” in Sustainability, vol. 14, (2022, pp. 32–58. doi: 10.3390/su14063258.
[58]H. Lehtimaki, V.V. Piispanen, and K. Henttonen, “Strategic decisions related to circular business model in a forerunner company: challenges due to path dependency and lock-in,” in South Asian journal of business and management, vol. 9(3), 2020. doi: 10.1177/2277977920957957.
[59]S. Smerichevska, Z. Poberezhna, O. Mykhalchenko, Y. Shtyk, and Y. Pokanevych, “Modeling and evaluation of organizational and economic support for sustainable development of transport enterprises: innovative and ecological aspects,” in Financial and Credit Activity: Problems of Theory and Practice, vol. 4, 2023, pp. 218–229. doi: 10.55643/fcaptp.4.51.2023.4121.
[60]S. Smerichevskyi, Z. Poberezhna, O. Mykhalchenko, Y. Petrova, and V. Smilyanets, “Ensuring the sustainable development of the aviation enterprise in the context of forming innovative potential using digital technologies,” in CEUR Workshop Proceedings, vol. 3732, 2024, pp. 174–185.
[61]J. A. Mesa, A. González‑Quiroga, “Development of a diagnostic tool for product circularity: a redesign approach,” in Research in Engineering Design, vol. 34, 2023, pp. 401–420. doi: 10.1007/s00163-023-00415-5.
[62]S. Smerichevskyi, Z. Poberezhna, I. Kryvovyazyuk, L. Ivanenko, and D. Malnov, “Formation of principles of a customer-oriented approach by transport enterprises in conditions of sustainable development,” in E3S Web of Conferences. International Scientific and Practical Conference Innovations in Construction and Smart Building Technologies for Comfortable, Energy Efficient and Sustainable Lifestyle, 2024, vol. 534. doi: 10.1051/e3sconf/202453401022.
[63]T. Li, H. Zhang, C. Yuan, Z. Liu, and C. Fan, “A PCA-based method for construction of composite sustainability indicators,” in The International Journal of Life Cycle Assessment, Vol. 17(5), 2012, pp. 593–603. doi: 10.1007/s11367-012-0394-y.
[64]Jain, N., and G. Mohapatra, “A comparative assessment of composite environmental sustainability index for emerging economies: A multidimensional approach,” in Management of Environmental Quality, Vol. 34(2), 2023, pp. 425–446. doi: 10.1108/MEQ-04-2022-0086.
[65]Financial statements of the enterprise SC “KUHNE & NAGEL”, 2025. URL: https://clarity-project.info/edr/24596990/finances.
[66]Financial statements of the enterprise SC “SHENKER”, 2025. URL: https://clarity-project.info/edr/24382029/finances.
[67]Financial statements of the enterprise LLC “ZAMMLER UKRAINE”, 2025. URL: https://clarity-project.info/edr/35007717/finances.
[68]Streamlit application for Circular Economy Adaptation Index (CEAI), 2025. URL: https://doi.org/10.5281/zenodo.17720643.

International Journal of Information Engineering and Electronic Business (IJIEEB)

MECS Press Journal